|
||||||||||||||
|
||||||||||||||
 |
|
500 to 12000 GPD Brackish Water RO
Reverse osmosis, also known as hyper filtration, is used by our Commercial Brackish Water Reverse Osmosis System to purify water and remove salts and other impurities. It is also capable of rejecting bacteria, sugars, proteins, particles, dyes, and other constituents that have a molecular weight of greater than 150-250 dalton.
STANDARD FEATURES
| Microprocessor Control Panel Powder coated frame (White Color) Heavy duty 5 micron sediment prefilter Corrosion resistant & efficient high pressure pump High efficiency motor FRP pressure vessel Product and Reject Flow Meters Low pressure switch Manual flush |
Electric feed solenoid valve High rejection TFC spiral membranes Tagging and identification of instrumentation Heavy duty high pressure tubing Unique non corrosive high pressure regulating valve Water tight power wiring / shrouding Liquid filled pressure gauges (Pre and Post Filter, Pump Pressure) Factory tested 220V/1Ph/60Hz |
AVAILABLE OPTIONS
| Pretreatment lockout High pressure switch TDS meter and/or pH meter Waste recycling valve Recycle flow meter Tank float switch 220V/3Ph/60 Hz 220/240V/1Ph/50 Hz 380-415V/3Ph/50Hz |
Automatic flush Pre/post-treatment pressure gauges Export wood crating Custom designed units Media fifilters Ozonation system /UV sterilizers Water softeners Post DI polishers Blending option: feed/product |
The spirally wound membranes are housed inside a round pressure vessel. Water pressure is applied at the membrane inlet to remove disolved solids from the feed water. As the water flows across the outside of each membrane, the pressure drives pure water through the membrane and purified water exists through the internal permeate tube. The water remaining outside the membrane is concentrated typically sent to drain.
OPERATION SRECIFICATIONS
| Feed water temperature = 95º F Max. Hydrogen Sulfide must be removed Feed water pressure = 20 to 80 psi Turbidity should be removed Operating pressure: 175 to 220 psi Iron tolerance: 0.05 ppm Max. |
Feed water TDS: 0-2,000 ppm, up to 4000 ppm as option Hardness over 1 GPG requires water softener pH range: 3-11 Units can handle higher TDS by lowering recovery Silica Tolerance: 25 ppm max. @ 60% recovery |
TYPES
GPD |
Membranes |
Pump HP |
Unit Specifications |
|||
Size |
Qty |
60Hz |
50Hz |
Dimensions |
Wt (lbs) |
|
500-600 |
2.5"x40" |
1 |
3/4 |
3/4 |
23"x27"x54" |
100 |
1,000-1,200 |
2.5"x40" |
2 |
3/4 |
3/4 |
23"x27"x54" |
110 |
1,500-2,000 |
4"x40" |
1 |
1 |
1 |
23"x27"x54" |
125 |
3,000-4,000 |
4"x40" |
2 |
1 |
1 |
23"x27"x54" |
160 |
4,500-6,000 |
4"x40" |
3 |
1 |
1 |
23"x27"x54" |
190 |
6,000-8,000 |
4"x40" |
4 |
1.5 |
1.5 |
23"x32"x54" |
220 |
7,500-10,000 |
4"x40" |
5 |
2 |
2 |
23"x32"x54" |
250 |
9,000-12,000 |
4"x40" |
6 |
2 |
2 |
23"x32"x54" |
280 |
12,000-16,000 |
4"x40" |
8 |
3 |
3 |
34"x32"x60" |
380 |
15,000-20,000 |
4"x40" |
10 |
3 |
3 |
34"x32"x60" |
450 |
NOTE: THE SPECIFICATIONS CAN BE CHANGED ACCRODING TO YOUR REQUIREMENTS.
 |
|
 No.145, Jin sha jiang Road,
Putuo District, Shanghai 200062, China |
 Tel: +86-21-51095402
Fax: +86-21-51685891 |