|
||||||||||||||
|
||||||||||||||
 |
|
Water Makers - 380 to 7,600 GPD Commercial and 11,000 to 180,000 GPD
Industrial Seawater Reverse Osmosis Systems
Sea Water Reverse Osmosis series is available with capacities ranging from 380 GDP to 7,600 GDP for commercial needs and from 11,000 GDP to 180,000 GDP for industrial use.
COMMERCIAL WATER MAKER FEATURES
| 5 micron prefilter Premium quality corrosion resistant high pressure pump with motor protected by a precision engineered "pulsation-dampener" on 7.5 hp and higher models High quality, glycerin filled 316 SS pressure gauges Product & Reject flow meters Stainless steel frame TFC spiral wound membranes |
FRP membrane housing 220V or 460/3Ph/60Hz Stainless steel pressure regulating valve, for reject stream High pressure tubing Automatic feed water shut off valve PLC control panel |
INDUSTRIAL WATER MAKER FEATURES
| Heavy duty 5 micron sediment prefilter Premium quality nickel-brass-bronze or sea water resistant SS pump, protected by a precision engineered pulsation-dampener High quality, glycerin-filled 316 SS pressure gauges Product & Reject flow meters TFC spiral wound membranes FRP membrane housings 460V/3Ph/60Hz |
Low & High pressure switches Permeate TDS monitor PVC low pressure piping Stainless steel high pressure piping Stainless steel throttling valve for reject stream Automatic feed shut off valve Energy recovery on model: SW-46K-3480 and larger Stainless steel frame PLC control panel |
The spirally wound membranes are housed inside a round pressure vessel. Water pressure is applied at the membrane inlet to remove disolved solids from the feed water. As the water flows across the outside of each membrane, the pressure drives pure water through the membrane and purified water exists through the internal permeate tube. The water remaining outside the membrane is concentrated typically sent to drain.
OPERATION SRECIFICATIONS
| Feed water temperature = 95º F Max. Feed water pressure = 40 to 80 psi Turbidity should be removed Maximum operating pressure: 1000 psi Iron tolerance: 0.05 ppm Max. |
Feed water TDS: 42,000 ppm, or higher as an option pH range: 3-11 Chlorine and other oxidants should be removed No bacteriological or organic content Membrane rejection: 92-95% |
TYPES
GPD |
Qty. |
HP |
Dimensions |
Wt. (Lbs) |
|
Commercial Seawater Reverse Osmosis Systems |
|||||
380 |
1 |
1.5 |
51" x 17" x 15 |
220 |
|
700 |
2 |
1.5 |
51" x 17" x 15 |
230 |
|
1,000 |
3 |
3 |
51" x 17" x 28 |
250 |
|
1,300 |
4 |
3 |
51" x 17" x 28 |
290 |
|
2,150 |
2 |
7.5 |
61" x 34" x 50 |
500 |
|
3,000 |
3 |
7.5 |
61" x 34" x 50 |
360 |
|
3,800 |
4 |
7.5 |
61" x 34" x 50 |
500 |
|
4,700 |
5 |
10 |
61" x 34" x 50 |
750 |
|
5,500 |
6 |
10 |
61" x 34" x 50 |
850 |
|
6,000 |
7 |
10 |
61" x 34" x 50 |
970 |
|
7,600 |
8 |
15 |
61" x 34" x 50 |
1,050 |
|
Note: All flow rates are at 42k mg/L |
|||||
Industrial Seawater Reverse Osmosis Systems |
|||||
11,600 |
3 |
20 |
195"x45"x75" |
2,500 |
|
15,000 |
4 |
25 |
195"x65"x75" |
2,750 |
|
22,700 |
6 |
40 |
195"x65"x75" |
3,200 |
|
31,250 |
8 |
50 |
195"x75"x75" |
4,150 |
|
46,950 |
12 |
75 |
195"x75"x75" |
5,500 |
|
63,050 |
16 |
100 |
195"x75"x75" |
6,500 |
|
68,000 |
18 |
100 |
195"x75"x75" |
10,000 |
|
90,400 |
24 |
120 |
370"x55"x79" |
12,000 |
|
113,000 |
30 |
120 |
370"x55"x79" |
13,000 |
|
135,400 |
36 |
140 |
475"x65"x79" |
14,000 |
|
159,000 |
42 |
175 |
475"x65"x79" |
15,000 |
|
182,050 |
48 |
175 |
475"x65"x79" |
17,000 |
|
NOTE: All specifications are listed with capacity at 42,000 ppm feed water TDS |
|||||
NOTE: THE SPECIFICATIONS CAN BE CHANGED ACCRODING TO YOUR REQUIREMENTS.
 |
|
 No.145, Jin sha jiang Road,
Putuo District, Shanghai 200062, China |
 Tel: +86-21-51095402
Fax: +86-21-51685891 |